top of page

Wilger Nozzles

View Product Specifications

for part numbers

​

COMBO-JET® spray tips use a patented "all-in-one" design, so the cap, tip, O-ring and strainer all snap into one piece.
COMBO-JET spray tips for broadcast spraying are available in 80° and 110° angles. The design makes it safer and easier to handle, and Combo-Jet® strainers also are 40% longer than other brands, so they plug less.

​

Every series of spray tip is compatible with all PWM systems, and the drift reduction for each series does not rely on air induction or air deduction to work perfectly.

Finer Spray

Best Drift 

Reduction

COMBO-JET® BROADCAST NOZZLES

COMBO-JET ER Series

Wilger Nozzle ER80-04
Wilger Nozzle ER110-04

  • The ER series is made up of a conventional flat fan tip, producing fine coverage and small droplets.

  • ER spray tips do not reduce drift, and are typically used as a baseline for comparing drift reduction in other tips.

  • Ideal for applications which require fine coverage, and are not very drift sensitive. (i.e. fungicides)


FEATURES:

  • Approved for PWM spray systems

  • Compatible with all PWM spray systems/Hz

  • Operating pressure 20-100 psi

  • Flat fan nozzle type

  • Conventional flat fan

  • Spray Tip: stainless steel

  • O-ring: FKM, 13mm x 3mm #40260-00

  • Cap: glass-reinforced polypropylene

COMBO-JET SR Series

Wilger Nozzle SR80-04
Wilger Nozzle SR110-06

  • The SR series Wilger’s 1st stage drift reduction series, producing excellent coverage, with significant drift reduction.

  • Closed-chamber, pre-orifice drift reduction nozzle, emphasizing a first stage of drift reduction

  • The SR series balances excellent coverage spray with significant drift reduction upwards of 50%+.

  • Ideal for applications which require fine coverage, but require significant drift reduction. (i.e. contact herbicides/fungicides)


FEATURES:

  • Approved for PWM spray systems

  • Compatible with all PWM spray systems/Hz

  • Operating pressure 25-100 psi

  • Flat fan nozzle type 

  • Closed-chamber, pre-orifice drift reduction

  • Spray Tip: stainless steel

  • O-ring: FKM, 13mm x 3mm #40260-00

  • Cap: glass-reinforced polypropylene

COMBO-JET MR Series

Wilger Nozzle MR80-05
Wilger Nozzle MR110-10

  • The MR series spray tip is a closed-chamber, pre-orifice drift reduction nozzle, emphasizing a 2nd stage of drift reduction.  

  • The MR series balances great coverage spray with significant drift reduction upwards of 75%+.

  • Ideal for applications which require good coverage, but require high levels of drift reduction. (i.e. systemic herbicides)


FEATURES:

  • Approved for PWM spray systems

  • Compatible with all PWM spray systems/Hz

  • Operating pressure 30-100 psi

  • Flat fan nozzle type 

  • Closed-chamber, pre-orifice drift reduction

  • Spray Tip: stainless steel

  • O-ring: FKM, 13mm x 3mm #40260-00

  • Cap: glass-reinforced polypropylene

COMBO-JET DR Series

Wilger Nozzle DR80-03
Wilger Nozzle DR110-02

  • The DR series spray tip is a closed-chamber, pre-orifice drift reduction nozzle, emphasizing a 3rd stage of drift reduction.  

  • The DR series balances good coverage spray with extremely low driftable fines, upwards of a 90% reduction in driftable fines.

  • Ideal for applications which value drift reduction over coverage.  Typically coverage is maintained by using higher application volumes. (i.e. ground-applied & systemic herbicides)


FEATURES:

  • Approved for PWM spray systems

  • Compatible with all PWM spray systems/Hz

  • Operating pressure 30-100 psi

  • Flat fan nozzle type 

  • Closed-chamber, pre-orifice drift reduction

  • Spray Tip: stainless steel

  • O-ring: FKM, 13mm x 3mm #40260-00

  • Cap: glass-reinforced polypropylene

COMBO-JET UR Series

Wilger Nozzle UR110-10

  • The UR series spray tip is a dual-chamber, pre-orifice drift reduction nozzle, emphasizing the coarsest stage of drift reduction.   

  • The UR series is heavily suited to ultra-low driftable fines, emphasizing drift reduction over coverage.

  • Ideal for applications which value drift reduction over coverage.  Typically coverage is maintained by using higher application volumes. (i.e. ground-applied & systemic herbicides)


FEATURES:

  • Approved for PWM spray systems

  • Compatible with all PWM spray systems/Hz

  • Operating pressure 35-100 psi

  • Flat fan nozzle type 

  • Dual closed-chamber, pre-orifice drift reduction

  • Spray Tip: stainless steel

  • O-ring: FKM, 13mm x 3mm #40260-00

  • Cap: glass-reinforced polypropylene

COMBO-RATE® NOZZLE BODIES

bottom of page