top of page

TeeJet Line Strainers

AA126 Series
Flush Out Line Strainer



  • 200 PSI maximum pressure rating

  • Strainer head and bowl are made of glass-filled polypropylene with EPDM gasket

  • Screens are made of 304SS with color-coded polypropylene frames and are removable for cleaning

  • Removable cap and O-ring for flush-out or self-cleaning operations

  • Integral mounting provision allows the strainer to be attached to machine using M8 or 5/16" diameter bolts

  • Available with 3/4", 1" NPT or BSPT (F) threads and 50 series flange fitting connections for easy assembly

  • Uses same screen as the AA124A line strainer

  • Strainers with mounting lugs are designated by “ML”.

AA124 Series
Self-Cleaning Line Strainer


The TeeJet self-cleaning strainer extends your spraying time with a self-cleaning feature that minimizes clogging. Mounted on the discharge side of the pump, the strainer uses excess pump flow to bypass clogging particles back to the spray tank.
The tapered inner cylinder inside the entire length of the screen provides a gap between the screen face and the cylinder. This gap causes the inlet fluid to flow at a high velocity past the screen face providing for a continuous wash down of particles to the bypass line. In order for the wash down to occur, a minimum flow rate of 6 GPM for 3/4" and 1" sizes and 8 GPM for 1-1/4" and 1-1/2" sizes is required through the bypass line.


  • Available with or without mounting lugs

  • AA126 strainers are made of glass filled polypropylene and are available in 3/4", 1", 1-1/4", 1-1/2" (F) NPT or BSPT thread as well as 50 and 75 series flange connection

  • AA124 strainers are made of an aluminum head with a  nylon bowl and are available in 3/4", 1", 1-1/4", 1-1/2" (F) NPT or BSPT thread

  • Both use an all stainless steel strainer element

  • Strainers with mounting lugs are designated by “ML”.


AA122 Series
Compact Line Strainer

 w/ Quick Connect outlets


  • The AA122 line strainer features a compact size that is well suited for small agricultural and turf sprayers.

  • Constructed of a polypropylene head and bowl with stainless steel screen for excellent chemical resistance and is available with 1/2" or 3/4" (F) NPT pipe connections. 

  • Maximum pressure rating is 150 PSI

  • A Quick Connect version of the 122 is also available for easy installation on valves/manifolds equipped with Quick Connect outlets. The maximum pressure rating for this version is 215 PSI.

  • Strainers with mounting lugs are designated by “ML”.

bottom of page