top of page

Pentair Hypro Nozzles

View Product Specifications

for part numbers

Ultra Lo-Drift 120˚

The ULD – Ultra Lo-Drift is the ideal spray nozzle for use where drift reduction is paramount. The nozzle produces large air-filled droplets, which cut drift dramatically compared with a standard fan and conventional low-drift spray nozzles.

Hypro ULD 120 Nozzle
Hypro ULD 120 Nozzle
Hypro ULD 120 Nozzle
Hypro ULD 120 Nozzle
Hypro ULD 120 Nozzle

Features:

  • Wide spray angle (120°) enables boom height to be lowered to further decrease drift

  • Pattern - Tapered Flat Fan 

  • FastCap complete includes nozzle, cap, gasket and integrated strainers

  • Common Use - weed and disease control with systemic agrochemicals

  • Technology - Air Induction

  • Material - Polyacetal

  • Spray Angle - 120˚

  • Pressure Range - 20-115 PSI (1-8 BAR)

3D 100˚

Designed in partnership with Syngenta using wind tunnel research and more than 10 years of agronomic field trials. Proven to deliver an increase in pre-emerge weed control compared to a conventional flat fan. Creates the optimum droplet size for coverage, fewer droplets bounce off or drift away.

3D 100˚ nozzles

Features:

  • 60-75% drift reduction compared to flat fan nozzles, achieving up to a 3 Star LERAP rating at specific nozzle size/pressure combinations

  • Inclined spray is designed to be installed alternating forward and backward on boom to provide 3-dimensional coverage on vertical targets such as grass weeds, soil clods and broad leaved canopies

  • Common Use - Weed control, plant health

  • Pattern - Alternating Tapered Flat Fans

  • Technology - Advanced Tapered Flat Fan

  • Material - Polyacetal

  • Spray Angle - 100˚

  • Pressure Range - 10-90 PSI (0.7-6 BAR)

  • Configuration - Tips, SnapLock

GUARDIANAIR TWIN 110˚

GuardianAIR Twin spray nozzles are the best choice for high coverage applications where on-target spray delivery is important. They are ideal for low crops with complex canopies, such as vegetables, where thorough coverage of the target and protection of the surroundings are of high importance.

Hypro Guardianair Twin 110 Nozzle
Hypro Guardianair Twin 110 Nozzle
Hypro Guardianair Twin 110 Nozzle
Hypro Guardianair Twin 110 Nozzle

Features:

  • High-coverage forward and rear facing fans provide coverage on both sides of target.

  • Engineered to provide better coverage with more drops per gallon or litre compared to other air-induced sprays

  • Easy-to-install, patent-pending locking ring and o-ring seal design

  • FastCap complete includes nozzle, cap, gasket and is available with or without a filter

  • Common Use - plant health

  • Pattern - Tapered Flat Fan

  • Technology - Air Induction

  • Material - Polyacetal

  • Spray Angle - 110˚

  • Pressure Range - 30-115 PSI (2-8 BAR)

  • Configuration - FastCap Complete

GUARDIANAIR 110˚

The Hypro GuardianAIR spray nozzle has a unique rearward spray incline provides more uniform coverage. Higher flow nozzles used at faster speeds have a greater spray incline.

GUARDIANAIR 110˚
GUARDIANAIR 110˚ NOZZLES

Features:

  • Air-induced sprays reduce drift while increasing droplet deposition and retention on foliage

  • Provides better coverage with more drops per gallon or litre compared to other common air-induced spray nozzles

  • Speed-optimized spray incline allows more uniform coverage

  • Specifically engineered nozzle to maintain droplet spectrum regardless of orifice size

  • FastCap includes nozzle, cap and gasket

  • Common Use - plant health

  • Pattern - Tapered Flat Fan

  • Technology - Air Induction

  • Material - Polyacetal

  • Spray Angle - 110˚

  • Pressure Range - 20-115 PSI (1-8 BAR)

  • Configuration - Nozzles, FastCap

GUARDIAN 120˚

Guardian spray nozzles are ideal for insecticide and fungicide applications especially when used with suspension based adjuvants. The Guardian’s unique 20° inclined spray pattern allows users to aim the spray rearward for general spraying, forward for vertical targets, or alternate nozzles to create a twin spray.

GUARDIAN 120˚
GUARDIAN 120˚ NOZZLES

Features:

  • Pre-orifice design for courser spray availability the flat fans

  • PWM system compatible

  • A bold arrow indicates incline direction for easy installation

  • FastCap complete includes nozzle, cap, gasket and integrated strainers

  • Common Use - plant health

  • Pattern - Tapered Flat Fan

  • Technology - Pre-Orifice

  • Material - Polyacetal

  • Spray Angle - 120˚

  • Pressure Range - 20-115 PSI (1-8 BAR)

  • Configuration - FastCap Complete

LO-DRIFT 80˚ & 110˚

The Lo-Drift is the original drift-reducing nozzle. The special two-part construction includes a pre-orifice, which reduces the number of drift prone droplets.

LO-DRIFT 80˚ & 110˚ NOZZLES

Features:

  • Significantly reduces spray drift, widening the operational window

  • Balanced droplet size for effective, on-target spray

  • PWM system compatible

  • Common Use - plant health

  • Pattern - Tapered Flat Fan

  • Technology - Pre-Orifice

  • Material - Polyacetal

  • Spray Angle - 80˚ & 110˚

  • Pressure Range - 20-70 PSI (1-5 BAR)

  • Configuration - Nozzles, FastCap

VARIABLE PRESSURE 80˚ & 110˚

Variable Pressure nozzle maintain a consistent spray angle over a wide pressure range down to 20 PSI (1 BAR) and are available in 80° and 110° versions to work with different boom heights.

VARIABLE PRESSURE 80˚ & 110˚ NOZZLES
VARIABLE PRESSURE 80˚ & 110˚ NOZZLES

Features:

  • Adjustable droplet size according to pressure

  • Maintains good spray distribution and makes larger droplets at low pressures

  • FastCap includes nozzle, cap and gasket

  • Excellent nozzle for a wide variety of herbicide and insecticide applications

  • PWM system compatible

  • Common Use - general

  • Pattern - Tapered Flat Fan

  • Technology - Elliptical Orifice

  • Material - Polyacetal

  • Spray Angle - 80˚ & 110˚

  • Pressure Range - 20-70 PSI (1-5 BAR)

  • Configuration - Nozzles, FastCap

HI-FLOW 140˚

The Hypro® Hi-Flow nozzle is the best way to outfit a sprayer to achieve wide angle coverage plus drift control. The 140° pattern ensures unmatched uniformity across the spray boom and allows lower spray heights to reduce the risk of drift during sensitive applications.

Hypro Hi-Flo 140 Nozzle
Hypro Hi-Flo 140 Nozzle
Hypro Hi-Flo 140 Nozzle
Hypro Hi-Flo 140 Nozzle
Hypro Hi-Flo 140 Nozzle

Features:

  • Frequently used with fertilizer/herbicide mixtures for early season weed control

  • Straight-through design to reduce clogging and drift

  • Incredibly uniform application across the boom

  • Lower spray heights and pre-orifice technology reduce drift

  • PWM compatible

  • Common Use - fertilizer

  • Pattern - Tapered Flat Fan

  • Technology - Pre-Orifice

  • Material - Polyacetal

  • Spray Angle - 140˚

  • Pressure Range - 20-80 PSI (1.5-6 BAR)

  • Configuration - FastCap

DEFLECTIP 80˚-160˚

The DeflecTip wide-angle flood fan nozzle creates a wide pattern at very low pressures while creating mainly medium and coarse droplets. It is well suited for mounting on machinery where a wide angle or a low spray height is desired and on sprayers using very low pressures, including manual sprayers.

DEFLECTIP 80˚-160˚ NOZZLE

Features:

  • Sprays at very low pressures

  • Medium to coarse spray is suited for a variety of applications

  • Larger sizes are suitable for liquid fertilizer applications

  • Large circular orifice reduces the chances of blocking

  • For use of single nozzles with knapsack/backpack sprayers

  • Common Use - weeds & fertilizer

  • Pattern - Flood

  • Technology - Deflection

  • Material - Polyacetal

  • Spray Angle - 80˚-160˚

  • Pressure Range - 10-60 PSI (1-3 BAR)

  • Configuration - Nozzle

ESI SIX STREAM

The ESI six stream nozzle is designed for applying liquid fertilizer. It creates six individual streams that distribute the fertilizer on the soil while getting less on the crop. The wear resistant metering orifice and unique low pressure distribution chamber keep the streams stable to reduce atomization and prevent leaf burn and scorching. Spacing and spray height is similar to 110° broadcast nozzles.

ESI SIX STREAM NOZZLE
ESI SIX STREAM NOZZLES

Features:

  • Six streams distribute fertilizer more evenly than one single stream

  • Wear-resistant orifice for long product life

  • FastCap includes nozzle, cap and gasket

  • Common Use - fertilizer

  • Pattern - Streams

  • Technology - Pre-Orifice

  • Material - Ceramic or Polyacetal

  • Spray Angle - 110˚ Equivalent

  • Pressure Range - 15-60 PSI (1-4 BAR)

  • Configuration - Nozzle, FastCap

FLOW REGULATING DISC DC

The Hypro Flow Regulating Disc – DC is commonly paired with push-to-connect products in liquid fertilizer systems onboard planting equipment.

FLOW REGULATING DISC DC

Features:

  • Regulates flow and produces a straight stream pattern

  • Precision-molded in polyacetal for reliable performance

  • Conveniently packaged in a quantity of ten

  • Common Use - fertilizer

  • Pattern - Stream

  • Technology - Round Orifice

  • Material - Polyacetal

  • Spray Angle - 0˚

  • Pressure Range - 10-150 PSI (1-10 BAR)

  • Configuration - Disc

HOLLOW CONE - SWIRLTIP DISC & CORES 25˚-110˚

The Hypro SwirlTip disc and core hollow-cone spray nozzles produce finely atomized droplets.

HOLLOW CONE - SWIRLTIP DISC & CORES 25˚-110˚
HOLLOW CONE - SWIRLTIP DISC & CORES 25˚-110˚

Features:

  • Hollow cone pattern in a variety of spray pattern widths

  • Discs conveniently packaged in a quantity of ten

  • Common Use - plant health

  • Pattern - Hollow cone

  • Technology - Swirl

  • Material - Polyacetal

  • Spray Angle - 25˚ - 110˚

  • Pressure Range - 10-150 PSI (1-10 BAR)

  • Configuration - Nozzle

HOLLOW CONE - HCX 80˚

The Hypro Hollow-Cone spray nozzles are excellent for fungicide and insecticide application. The HCX produces finely atomized droplets in a hollow-cone, 80-degree pattern.

HOLLOW CONE - HCX 80˚

Features:

  • Precision-molded in polyacetal for durable product life

  • Wide operating pressure

  • Common Use - plant health

  • Pattern - Hollow cone

  • Technology - Swirl

  • Material - Polyacetal

  • Spray Angle - 80˚

  • Pressure Range - 40-150 PSI (3-10 BAR)

  • Configuration - Nozzle

HOLLOW CONE - CERAMIC ATR 80˚

The Albuz® hollow-cone ceramic spray nozzles produce finely atomized droplets in a hollow-cone, 80-degree pattern.

HOLLOW CONE - CERAMIC ATR 80˚ NOZZLES

Features:

  • Easily separated, two-piece construction for simple cleaning

  • Wide operating pressure range suitable for many applications

  • Commonly used in air blast and other high pressure spraying applications

  • Common Use - plant health

  • Pattern - Hollow cone

  • Technology - Swirl

  • Material - Ceramic

  • Spray Angle - 80˚

  • Pressure Range - 40-350 PSI (3-24 BAR)

  • Configuration - Nozzle

FULL CONE DIRECTED - FCX 80˚

The FCX full-cone spray nozzle is especially suited for coverage sensitive applications of insecticide/fungicides.

FULL CONE DIRECTED - FCX 80˚ NOZZLES

Features:

  • Full cone pattern to give superior coverage with non-air inducted droplets

  • 80° spray angle makes the product easy to direct for spot applications

  • Broad operating range for application flexibility

  • Common Use - plant health

  • Pattern - Full Cone

  • Technology - Swirl

  • Material - Polyacetal

  • Spray Angle - 80˚

  • Pressure Range - 15-150 PSI (1-10 BAR)

  • Configuration - Nozzle

BRASS OFF-CENTER OC 80˚

The Hypro® OC flat fan off-center brass spray nozzle is an economical nozzle for spraying around obstacles or defining the edge of a spray swath.

BRASS OFF-CENTER OC 80˚

Features:

  • Creates half of a broadcast pattern

  • Generally positioned at the end of a boom

  • Designed for use with overlapping broadcast patterns to provide precise width control

  • Common Use - unspecialized

  • Pattern - Off-Center Fan

  • Technology - Elliptical Orifice

  • Material - Brass

  • Spray Angle - 80˚

  • Pressure Range - 30-60 PSI (2-4 BAR)

  • Configuration - Nozzle

BOOMLESS FLAT FAN NOZZLES - XT-BOOM X TENDER

The XT introduces boomless spray technology, enabling spray to be targeted into places that conventional booms and other nozzles cannot reach. XT delivers a uniform spray pattern over a distance of up to 16 feet (4.9 m). Ideal for weed control in forests and pastureland.

Hypro Boomless Flat Fan Nozzle
Hypro Boomless Flat Fan Nozzle
Hypro Boomless Flat Fan Nozzle
Hypro Boomless Flat Fan Spray Pattern

Features:

  • Ideal for applications where a conventional boom cannot be used due to obstacles

  • Common uses include orchard, vineyard, forestry, pasture, turf and golf course spraying, as well as maintaining rights-of-way and fence rows

  • Excellent low-drift option while extending spray reach

  • Large droplet size reduces spray drift and promotes spray penetration

  • Maintains a consistent spray swath over a pressure range of 30-60 psi (2-5 bar)

  • Standard models with precision-molded polyacetal nozzle and threaded stainless steel body provide excellent durability and low maintenance

  • Common Use - weeds

  • Pattern - Boomless Fan

  • Technology - Pre-Orifice

  • Material - Stainless or Polyacetal

  • Spray Angle - 105˚

  • Configuration - MNPT & FastCap

Hypro Boomless Flat Fan Spray Images
bottom of page