top of page

XRC TeeJet®

Turbo TeeJet® Induction (TTI)

Flat Spray Broadcast Nozzle


Features:

  • Tapered edge wide angle flat spray pattern for uniform coverage in broadcast spraying.

  • 15° attack angle for better canopy penetration.

  • Available in polymer and ceramic for more flexibility on the choice according to different pesticide formulation.

  • Large, rounded internal passage to minimize clogging.

  • Polymer material used on the TT-VP provides a good wear life and acid resistance.

  • The TT-VK polypropylene body provides excellent acid resistance and the ceramic pre- and exit orifice offers improved wear life.

  • Unique internal configuration means substantially longer wear life.

  • Available in eleven VisiFlo® Polymer (VP) and nine VisiFlo ceramic (VK) capacities.

Turbo TeeJet®

Wide Angle Flat Spray Broadcast Nozzle


Features:

  • Tapered edge wide angle flat spray pattern for uniform coverage in broadcast spraying.

  • 15° attack angle for better canopy penetration.

  • Available in polymer and ceramic for more flexibility on the choice according to different pesticide formulation.

  • Large, rounded internal passage to minimize clogging.

  • Polymer material used on the TT-VP provides a good wear life and acid resistance.

  • The TT-VK polypropylene body provides excellent acid resistance and the ceramic pre- and exit orifice offers improved wear life.

  • Unique internal configuration means substantially longer wear life.

  • Available in eleven VisiFlo® Polymer (VP) and nine VisiFlo ceramic (VK) capacities.

XR TeeJet®

Extended Range Flat Spray Broadcast Nozzle


Features:

  • Tapered edge flat spray angle pattern for uniform coverage in broadcast spray application.

  • Reduces drift at lower pressures, better coverage at higher pressures.

  • Ceramic is available with corrosive resistant polypropylene VisiFlo colorcoded tip holder in 80° capacities 03–08 and 110° capacities 02–08.

  • XR110025 only available in VK.

  • XR80025 and XR80035 only available in VS.

  • Brass available in 110° only

AIC TeeJet®

Air Induction Flat Spray Broadcast Nozzle


Features:

  • AI TeeJet nozzle molded into Quick TeeJet® cap provides automatic spray alignment.

  • Produces a 110° tapered edge flat spray pattern for uniform coverage in broadcast spraying applications.

  • Air induction spray tip, producing large air-filled droplets through the use of a Venturi air aspirator more resistant to drift.

  • Available with a polymer insert holder with stainless steel (015–15 capacities), ceramic (025–05 capacities) or polymer (02–10 capacities) inserts.

  • Includes tightly fitting gasket that stays put and assures a good seal.

AccuPulse® TwinJet®

Twin Flat Spray Broadcast Nozzle


Features:

  • Specifically designed for use on sprayers equipped with Pulse Width Modulation (PWM) spray tip control.

  • Can also be used for non-PWM applications, where maximum drift control is desired.

  • Non-air induction Twin spray tip, that produces highly drift-resistant droplets (XC and UC).

  • Patent-pending recirculating design and concave exit orifice geometry provide optimal spray performance.

  • Twin spray pattern allows for improved coverage and canopy penetration.

  • Compact design fits into tight boom spaces and is less likely to be damaged during field use.

  • Available in ten VisiFlo® Polymer (VP) capacities.

  • Optimal for burndown, pre-emerge, and post-emerge systemic applications.

TTI TwinJet®

Flat Spray Broadcast Nozzle


Features:

  • TTI60 produces two 110° wide angle, flat spray patterns for uniform coverage in broadcast applications.

  • Extremely large drift resistant droplets are produced through the use of a venturi air aspirator.

  • Provides excellent drift control and produces minimal driftable fines— less than 1.5%.*

  • 60° angle between leading and trailing patterns for increased canopy penetration and leaf coverage.

  • All in one molded nozzle and Quick TeeJet® cap design provides automatic spray alignment.

  • Removable pre-orifice allows for disassembly and cleaning.

  • Available in seven VisiFlo® Polymer (VP) capacities.

AIXR TeeJet®

Air Induction XR Flat Spray Broadcast Nozzle


​Features:

  • Tapered edge flat spray angle pattern with air induction technology offers better drift management.

  • Produces large air-filled droplets through a Venturi air aspirator.

  • Unique UHMWPE polymer material used on the AIXR-VP adds improved wear life and better acid resistance.

  • The AIXR-VK polypropylene body provides excellent acid resistance, and the ceramic pre- and exit orifice offers improved wear life.

  • Compact size to prevent tip damage.

  • Removable pre-orifice.

  • Available in nine VisiFlo® Polymer (VP) and seven VisiFlo ceramic (VK) capacities.

AI TeeJet

Features:

  • The stainless steel insert produces a tapered-edge flat spray pattern for uniform coverage in broadcast spraying.

  • Produces large air-filled droplets through the use of a Venturi air aspirator that is more resistant to drift.

  • Recommended pressure rating 30–115 PSI (2–8 bar).

  • Available in 80° or 110° spray angles with a Polymer insert holder and pre-orifice with VisiFlo® color-coding.

  • Available in eight 110° versions, and seven 80° versions.

bottom of page